Skip to main content

What resolution (DPI) should my design have?

Most products need 150 DPI at print size; a few need more. The 3D Creator shows the print quality of each image.

DPI (dots per inch) tells how much detail your image has at its printed size.

150 DPI for most products

Most Subliminator products are printed with dye sublimation. For these, 150 DPI at the final print size is enough. A higher DPI doesn't print visibly better on these products. It only makes the file bigger.

A few products need a higher resolution. The 3D Creator checks this for you (see below). You can also see the minimum for a product in Products > Catalog: open the product and check Print Guidelines in the Design Templates tab.

Start from the design template

The easiest way to get the right resolution is to make your artwork at the exact size of the product's design template. See What image size should I use? (Design templates).

Check the quality in the 3D Creator

When an image is too small for the area it covers, the 3D Creator shows a note next to the layer in the Layers panel:

  • Normal quality (… DPI): the image is below the recommended resolution. It may look a bit soft.

  • Low quality (… DPI): the image will likely print blurry or pixelated.

If there is no note, the quality is good. The DPI changes when you resize a layer: making an image bigger lowers its DPI.

SVG files are vector, so they stay sharp at any size and never show this note.

Tips

  • Don't enlarge a small image to fill the template. Upscaling adds pixels but not detail.

  • Use the original, highest-quality version of your artwork.

  • Changing the DPI number in your design software without adding pixels does not improve the print.

Did this answer your question?